Skip to main content

Document library

PUBLICATION · Conference Paper

Development of Liquid Hydrogen Leak Frequencies Using a Bayesian Update Process

To quantify the risk of an accident in a liquid hydrogen system, it is necessary to determine how often a leak may occur. To do this, representative component leakage frequencies specific to liquid hydrogen can be determined as a function of the normalized leak size. Subsequently, the system characteristics (e.g., system pressure) can be used to calculate accident consequences.

PUBLICATION · Conference Paper

Analysis to support revised distances between bulk liquid hydrogen systems and exposures

The minimum distances between exposures and bulk liquid hydrogen listed in the National Fire Protection Agency’s Hydrogen Technology Code, NFPA 2, are based on historical consensus without a documented scientific analysis. This work follows a similar analysis as the scientific justification provided in NFPA 2 for exposure distances from bulk gaseous hydrogen storage systems, but for liquid hydrogen.

PUBLICATION · Conference Paper

Thermochemical cycle of a mixed metal oxide for augmentation of thermal energy storage in solid particles

Solid particle heat transfer and storage media have been shown to be able to operate at temperatures >1000 °C in concentrated solar power (CSP) applications, much higher than the operational limit of 600 °C for current state-of-the-art molten nitrate salt heat transfer fluid. Solid particles can be endothermically reduced by direct exposure to concentrated solar energy, thus absorbing and storing thermal energy beyond that possible with sensible heating alone.

Disclaimer- The documents and references herein are for information purposes only and should not be construed as endorsement by the Hydrogen Safety Panel.