Skip to main content

Document library

PUBLICATION · Research Paper

Fire Safety of Hydrogen Leaks

Quenching limits of hydrogen diffusion flames on small burners were observed. Four burner types,
with diameters as small as 8 m, were considered: pinhole burners, curved-wall pinhole burners, tube
burners, and leaky fittings. In terms of mass flow rate, hydrogen had a lower quenching limit and a higher
blowoff limit than either methane or propane. Hydrogen flames at their quenching limits were the weakest

PUBLICATION · Research Paper

Large-Scale Hydrogen Deflagrations and Detonations

Large-scale deflagration and detonation experiments of hydrogen and air mixtures provide fundamental data needed to address accident scenarios and to help in the evaluation and validation of numerical models such as the AutoReaGas code (used by Mitsubishi Heavy Industries, Ltd). Several different experiments of this type were performed. Measurements included flame-front time of arrival (TOA) using ionization probes, blast pressure, heat flux, high-speed video, standard video, and infrared video.

Disclaimer- The documents and references herein are for information purposes only and should not be construed as endorsement by the Hydrogen Safety Panel.