Skip to main content

Document library

PUBLICATION · Technical Report

HyRAM V2.0 User Guide

Hydrogen Risk Assessment Models (HyRAM) is a software toolkit that provides a basis for quantitative risk assessment and consequence modeling for hydrogen infrastructure and transportation systems. HyRAM integrates validated, analytical models of hydrogen behavior, statistics, and a standardized QRA approach to generate useful, repeatable data for the safety analysis of various hydrogen systems. HyRAM is a software developed by Sandia National Laboratories for the U.S. Department of Energy.

PUBLICATION · Technical Report

Identification of Hydrogen Material Risk Research Areas

This report presents a research framework for the application of quantitative risk assessment to hydrogen materials, based on the identification of potential areas of research, a literature review, and a plan for future work in the area of hydrogen materials risk. After outlining basics on hydrogen infrastructure, with a focus on pressure vessels, a number of materials risk topics are identified and discussed. Of these, four important areas of risk application to hydrogen materials are highlighted and discussed in further detail.

PUBLICATION · Technical Report

Potential Fire Suppression Agents for Metal Hydride Fires

Sodium chloride and four or five other particulate materials have been used successfully as fire suppression agents for specific combustible metal fires. The certification testing and National Fire Protection Association recommendations for using these suppression agents are summarized here. The sodium chloride based agent and ordinary sand have also been used in some sodium hydride fires, and in a sodium hydride fire test series.

Disclaimer- The documents and references herein are for information purposes only and should not be construed as endorsement by the Hydrogen Safety Panel.