| 3D risk management for hydrogen installations |
2017 |
Journal Article |
T. Skjold, D. Siccama, H. Hisken, A. Brambilla, P. Middha, K. Groth, A. LaFleur |
Hydrogen safety, 3d risk management, computational fluid dynamics, risk communication, emergency preparedness, quantitative risk analysis |
| A probabilistic visual-flowcharting-based model for consequence assessment of fire and explosion events involving leaks of flammable gases |
2017 |
Journal Article |
Y. Khalil |
consequence analysis, refueling stations, first responders, flammable gases, gaseous leaks, hydrogen fueling stations, risk-assessment, refueling stations, framework, life |
| Accidental hydrogen release in a gas chromatograph laboratory: A case study |
2017 |
Journal Article |
M. Henriksen, D. Bjerketvedt, K. Vaagsaether, A. Gaathaug, T. Skjold, P. Middha |
incident, Hydrogen, leak, safety valve, pressure regulator |
| An experimental study on the mechanism of self-ignition of high-pressure hydrogen |
2017 |
Journal Article |
W. Kaneko, K. Ishii |
shock wave, self-ignition, high-pressure hydrogen, rupture disk, tube, gas, discharge, jet |
| Analysis of acoustic pressure oscillation during vented deflagration and proposed model for the interaction with the flame front |
2017 |
Journal Article |
M. Schiavetti, M. Carcassi |
Hydrogen, vent, deflagration, flame acoustic interaction, hydrogen deflagration, volume |
| Application of quantitative risk assessment for performance-based permitting of hydrogen fueling stations |
2017 |
Journal Article |
A. LaFleur, A. Muna, K. Groth |
Hydrogen, Risk Assessment, quantitative risk, performance based design |
| Barriers to the adoption of fuel cell vehicles: A qualitative investigation into early adopters attitudes |
2017 |
Journal Article |
S. Hardman, E. Shiu, R. Steinberger-Wilckens, T. Turrentine |
plug-in hybrid, electric vehicles, consumer attitudes, market penetration, car buyers, Hydrogen, innovations, infrastructure, opportunities, technologies |
| Boundary layer effects on the critical nozzle of hydrogen sonic jet |
2017 |
Journal Article |
M. Afroosheh, F. Vakilimoghaddam, M. Paraschivoiu |
hydrogen release, high pressure reservoir, viscous flow in nozzle, converging-diverging nozzle effect, gas, simulation, release, flows |
| CFD evaluation against a large scale unconfined hydrogen deflagration |
2017 |
Journal Article |
I. Tolias, A. Venetsanos, N. Markatos, C. Kiranoudis |
open deflagration, Explosion, cfd modeling, fractal dimension, model comparison, adrea-hf, open atmosphere, models |
| CFD simulations of filling and emptying of hydrogen tanks |
2017 |
Journal Article |
D. Melideo, D. Baraldi, B. Acosta-Iborra, R. Cebolla, P. Moretto |
compressed hydrogen storage, hydrogen refuelling, tank fast filling, tank emptying, cfd validation, Hydrogen safety, temperature rise, heat-transfer, high-pressure, iii cylinder, performance, vehicle, model, mass |
| Characteristics of hydrogen leakage sound from a fuel-cell vehicle by hearing |
2017 |
Journal Article |
K. Maeda, Y. Tamura |
fuel-cell vehicle, Hydrogen, leakage sound, hearing test, traffic noise |
| Combustion of hydrogen-oxygen microfoam on the water base |
2017 |
Journal Article |
B. Kichatov, A. Korshunov, A. Kiverin, E. Son |
microscale combustion, hydrogen combustion, combustible microfoam, Hydrogen safety, multiphase processes, to-detonation transition, porous-medium combustor, Flame acceleration, diesel-engine, air mixtures, propagation, Safety, deflagration, ignition, overpressure |
| Comparative study of regulations, codes and standards and practices on hydrogen fuelling stations |
2017 |
Journal Article |
S. Pique, B. Weinberger, V. De-Dianous, B. Debray |
hydrogen fuelling stations, regulations, codes, standards, practices |
| Comparison of helium and hydrogen releases in 1 m and 2 m two vents enclosures: Concentration measurements at different flow rates and for two diameters of injection nozzle |
2017 |
Journal Article |
G. Bernard-Michel, D. Houssin-Agbomson |
Safety, helium, Hydrogen, similitude, Fuel cells, natural ventilation, fluid-mechanics, convection |
| Comparison of two-layer model for hydrogen and helium jets with notional nozzle model predictions and experimental data for pressures up to 35 MPa |
2017 |
Journal Article |
X. Li, D. Christopher, E. Hecht, I. Ekoto |
Hydrogen safety, underexpanded jets, notional nozzle models, flow partitioning, decay, gas |
| Composite gas cylinders - Probabilistic analysis of minimum load cycle requirements |
2017 |
Journal Article |
G. Mair, B. Becker, E. Duffner, H. Saul, A. Schoppa |
cycle strength, degradation, end of life, lucky punch area, slow burst test, statistical assessment, residual strength |
| Detonation wave propagation in semi-confined layers of hydrogen-air and hydrogen-oxygen mixtures |
2017 |
Journal Article |
J. Grune, K. Sempert, A. Friedrich, M. Kuznetsov, T. Jordan |
detonation limits, Hydrogen, semi-open channel, concentration gradients, critical height, critical concentration |
| Development of a model evaluation protocol for CFD analysis of hydrogen safety issues the SUSANA project |
2017 |
Journal Article |
D. Baraldi, D. Melideo, A. Kotchourko, K. Ren, J. Yanez, O. Jedicke, S. Giannissi, I. Tolias, A. Venetsanos, J. Keenan, D. Makarov, V. Molkov, S. Slater, F. Verbecke, A. Duclos |
hymep, model evaluation protocol, cfd, Hydrogen safety, susana project, validation and verification, databases, dispersion models, exercise, Garage, capabilities, combustion, release, predict, smedis, code, gas |
| Dynamics of ignition of stoichiometric hydrogen-air mixtures by moving heated particles |
2017 |
Journal Article |
J. Melguizo-Gavilanes, S. Coronel, R. Mevel, J. Shepherd |
hot particle ignition, industrial safety, aircraft safety, Numerical simulation, Hydrogen, explosive atmospheres, combustible mixture, inflammable gases, hot particles |
| Editors' Choice—Field Trials Testing of Mixed Potential Electrochemical Hydrogen Safety Sensors at Commercial California Hydrogen Filling Stations |
2017 |
Journal Article |
Eric Brosha, Christopher Romero, Daniel Poppe, Todd Williamson, Cortney Kreller, Rangachary Mukundan, Robert Glass, Amanda Wu |
oxide electrodes, ysz electrolyte, gas sensors, prototype, Electrochemistry, Materials Science |
| Effect of Pt/TiO2 interface on room temperature hydrogen sensing performance of memristor type Pt/TiO2/Pt structure |
2017 |
Journal Article |
Azhar Haidry, Andrea Ebach-Stahl, Bilge Saruhan |
hydrogen sensors, pt/tio2/pt, memristor, metal/semiconductor interface, conducting filaments, switching mechanism, gas, sensors, tio2, electrodes, anatase, h-2, au |
| Enhancing safety of hydrogen containment components through materials testing under in-service conditions |
2017 |
Journal Article |
B. Somerday, J. Campbell, K. Lee, J. Ronevich, C. Marchi |
high pressure hydrogen, Materials Testing, steels |
| Estimation of final hydrogen temperature from refueling parameters |
2017 |
Journal Article |
J. Xiao, P. Benard, R. Chahine |
Hydrogen storage, refueling, fast filling, thermodynamics, Temperature, rule of mixtures, charge-discharge cycle, fast filling simulations, storage-system, 70 mpa, iii cylinder, vehicle cylinder, tanks, model, rise, thermodynamics |
| Experimental determination of critical conditions for hydrogen-air detonation propagation in partially confined geometry |
2017 |
Journal Article |
W. Rudy, K. Dziubanii, M. Zbikowski, A. Teodorczyk |
Detonation, Hydrogen, semi-open channel, critical height, critical width, mixtures |
| Experimental investigation of spherical-flame acceleration in lean hydrogen-air mixtures |
2017 |
Journal Article |
C. Bauwens, J. Bergthorson, S. Dorofeev |
spherical flame acceleration, flame instabilities, gas explosions, background oriented schlieren, self-similar propagation, instabilities, pressures |