Skip to main content

The residual strength of automotive hydrogen cylinders after exposure to flames

Abstract

Fuel cell vehicles and some compressed natural gas vehicles are equipped with carbon fiber reinforced plastic (CFRP) composite cylinders. Each of the cylinders has a pressure relief device designed to detect heat and release the internal gas to prevent the cylinder from bursting in a vehicle fire accident. Yet in some accident situations, the fire may be extinguished before the pressure relief device is activated, leaving the high-pressure fuel gas inside the fire-damaged cylinder. To handle such a cylinder safely after an accident it is necessary that the cylinder keeps a sufficient post-fire strength against its internal gas pressure, but in most cases it is difficult to accurately determine cylinder strength at the accident site. One way of solving this problem is to predetermine the post-fire burst strengths of cylinders by experiments. In this study, automotive CFRP cylinders having no pressure relief device were exposed to a fire to the verge of bursting; then after the fire was extinguished the residual burst strengths and the overall physical state of the test cylinders were examined. The results indicated that the test cylinders all recorded a residual burst strength at least twice greater than their internal gas pressure for tested cylinders with new cylinder burst to nominal working pressure in the range 2.67-4.92 above the regulated ratio of 2.25. (C) 2018 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Year of Publication
2019
Journal
International Journal of Hydrogen Energy
Volume
44
Issue
17
Number of Pages
8759-8766+
Date Published
Apr 2
Type of Article
Article; Proceedings Paper
ISBN Number
0360-3199
Accession Number
WOS:000463689300009
DOI
10.1016/j.ijhydene.2018.12.055
Short Title
The residual strength of automotive hydrogen cylinders after exposure to flames
Alternate Journal
Int J Hydrogen Energ