Skip to main content

Modeling pressure loads during a premixed hydrogen combustion in the presence of water spray

Abstract

This paper proposes a method for pressure evolution modeling during combustion process in presence of water spray. A simplified model based on empirical correlations is developed, which allows the estimation of the main factors influencing the pressure evolution, such as the combustion rate, the convective heat loss and the droplet evaporation rate. The results are then used as a guideline to adjust the parameters of a three-dimensional hydrodynamic code based on CREBCOM combustion model developed and validated for large-scale hydrogen combustion. This methodology provides an approach to estimate the important parameters for the determination of the pressure loads. Simulation results for hydrogen-air combustion in presence of water spray using the present model compare favorably to the experimental data of Carlson et al. [1]. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Year of Publication
2019
Journal
International Journal of Hydrogen Energy
Volume
44
Issue
10
Number of Pages
4592-4607+
Date Published
Feb 22
Type of Article
Article
ISBN Number
0360-3199
Accession Number
WOS:000459837700005
DOI
10.1016/j.ijhydene.2018.12.162
Short Title
Modeling pressure loads during a premixed hydrogen combustion in the presence of water spray
Alternate Journal
Int J Hydrogen Energ